Filter
Top Products
Reference • 7
7-5SV40221 Rev. A
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT
NOTIFICATION AND ARE SUBJECT TO TEST
Envelope tray capacity: Up to a maximum of 300, 26 lb.
(90g/m
2
) envelopes
End Clearance: End clearance between the Insert
and envelope is a minimum of
1/4" (6mm) at each side (i.e., a
minimum of 1/2" [12mm] overall).
This measurement should be taken
with all Mail Piece contents placed
into the envelope.
Depth Clearance: The Mail Piece Contents must allow
a minimum clearance of 1/8" (3mm)
for unfolded inserts, and 1/4" (6mm
for folded material, below the flap
crease after being fully inserted
into the envelope.
Envelope flap and throat requirements:
Min 1" (25.5mm)
Max 2-1/2" (63mm)
Min 1/4" (6mm)
Max 1-5/8" (41mm)
3/4" (19mm)
Min 1/16" (1.6mm)
Max 1/4" (6mm)
throat depth
at 3/4" (19mm)
in from edge of
envelope
Closed flap tip should not
come closer than
1-3/4" (44mm) to bottom
of envelope
SV40221 Rev A book.indb 7-5 9/14/2004 5:51:29 PM