Filter
Top Products
Operator Functions • 3
3-7SV40221 Rev. A
For a C fold Job: Load the
Sheet Feeders from the
top feeder downwards, in
sequence (first sheet in top
feeder).
Load Sheets Face Up and Top
First.
For a Single fold job: Load the
Sheet Feeders from the bottom
feeder upwards, in sequence
(first sheet in bottom feeder).
Load Sheets Face Down and
Bottom First.
Loading Insert Feeder(s)
If either or both Insert Feeders are loaded with material when
SwiftStart is selected, the machine will feed the Inserts and make
them part of the SwiftStart™ job.
For a single Insert, load Insert Feeder F. For two Inserts, load Insert
Feeders F and G.
Booklets must be loaded into Insert Feeder F only and should be
loaded with the binding edge first.
Pre-folded Inserts should be fed with the open edge last.
Loading Envelope Feeder
Envelopes are loaded into Envelope
Feeder E flap side up, flap last.
SV40221 Rev A book.indb 3-7 9/14/2004 5:51:10 PM