Filter
Top Products
Operator Functions • 3
3-11SV40221 Rev. A
Manually Feeding Further Sets
After confirming a Trial Piece is OK, the machine will remember it’s
settings and process further manually fed sets automatically.
While the motor runs, the machine will remain in Manual Feed mode.
If no further sets are fed whilst the motor is running, after a brief
delay, the motor stops and the machine reverts to the previous Job
Definition selected.
If you wish to leave Manual Feed mode while the motor is running,
press Cancel twice.
The Manual Feed settings will be lost once a pre-programmed Job
Definition is selected or SwiftStart™ is operated.
SV40221 Rev A book.indb 3-11 9/14/2004 5:51:12 PM