Filter
Top Products
Appendix A • Control Panel Menus
Pitney Bowes DA500/DA550 Operator Guide A-29
6. Hex Dump
Mode
The information provided here is for those customers
who are technically inclined.
The Hex Dump Mode option causes the printer to print
all commands and data it receives from the computer in
a hexadecimal format. Use this feature to check the
integrity of your data. When you enable this option,
instead of addresses printing, a HEX dump of the data
stream prints on the material.
To use this option, the printer must be attached to a
computer.
1. Press the + or – buttons to scroll through the
Setup Menu options until 6. HEX DUMP MODE
appears.
2. Press the Enter button to select this option
which configures the printer to print raw ASCII
data. This is very useful when troubleshooting
computer (software) installation problems. See
the HEX chart on the next page for review.