Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 146 –
• Backup
This is used to backup the configuration to the local hard drive.
• Source File
Type in the name and path of the file or Browse to locate the upgrade
file.
Use the Proceed button to save configuration via TFTP or HHTP that be selected.
4.12.8 Firmware Upgrade
The Firmware Upgrade screen contains the following fields:
See figure 4-76
Figure 4-76 Firmware Upgrade via TFTP
The page contains the following fields:
Via TFTP
• Via TFTP
Defines the upgrade through a TFTP Server.
• File Type
Select file type to be upgraded through a TFTP Server. The possible
field values are :
• Software Image
• Boot Code
• TFTP Server
The TFTP Server IP Address that contains the source file to upgrade
from.
• Source File
Specifies the name of the upgrade file on the TFTP Server.
• Destination File
Type in the name and path of the file or Browse to locate the upgrade
file.