Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 297 –
Syntax
spanning-tree hello-time seconds
no spanning-tree hello-time
seconds — Time in seconds. (Range: 1 - 10)
Default Configuration
The default hello time for IEEE Spanning-Tree Protocol (STP) is 2 seconds.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures spanning-tree bridge hello time to 5 seconds.
Console(config)# spanning-tree hello-time 5
5.21.5 spanning-tree max-age
The spanning-tree max-age global configuration command configures the spanning-tree bridge maximum age.
To reset the default maximum age, use the no form of this command.
Syntax
spanning-tree max-age seconds
no spanning-tree max-age
seconds -Time in seconds. (Range: 6 - 40)
Default Configuration
The default max-age for IEEE STP is 20 seconds.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the spanning-tree bridge maximum-age to 10 seconds.