Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 375 –
Authenticator.
EapolStartFramesRx The number of EAPOL Start frames that have been received by this Authenticator.
EapolLogoffFramesRx The number of EAPOL Logoff frames that have been received by this Authenticator.
EapolRespIdFramesRx The number of EAP Resp/Id frames that have been received by this Authenticator.
EapolRespFramesRx
The number of valid EAP Response frames (other than Resp/Id frames) that have
been received by this Authenticator.
EapolReqIdFramesTx The number of EAP Req/Id frames that have been transmitted by this Authenticator.
EapolReqFramesTx
The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.
InvalidEapolFramesRx
The number of EAPOL frames that have been received by this Authenticator in which
the frame type is not recognized.
EapLengthErrorFramesRx
The number of EAPOL frames that have been received by this Authenticator in which
the Packet Body Length field is invalid.
LastEapolFrameVersion The protocol version number carried in the most recently received EAPOL frame.
LastEapolFrameSource The source MAC address carried carried in the most recently received EAPOL frame.
5.29.15 dot1x auth-not-req
The dot1x auth-not-req interface VLAN configuration command enables unauthorized users access to that VLAN. Use the no
form of this command to disable the access.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
This command has no arguments or keywords.
Default Configuration
User should be authorized to access the VLAN.
Command Mode
Interface configuration (VLAN) mode
User Guidelines
To define a VLAN for authorized and unauthorized users use the dot1x auth-not-req interface VLAN command.
Examples
The following example enables unauthorized users access to the VLAN.