Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 83 –
state.
■ 802.1X Settings of WGSD-Switch
Port based authentication enables authenticating system users on a per-port basis via an external server. Only authenticated
and approved system users can transmit and receive data. Ports are authenticated via the RADIUS server using the
Extensible Authentication Protocol (EAP). Refer to figure 4-30.
Figure 4-30 802.1x setting screen
The Page contains the following fields:
• Enable 802.1x
Place a checkmark in the check box to enable 802.1x, authentication
• Port
Indicates the port name
• Status Port Control
This specifies the port authorization state. The possible field values are as follows:
• Force-Authorized, the controlled port state is set to Force-Authorized (forward
traffic).
• Force-Unauthorized, the controlled port state is set to Force-Unauthorized
(discard traffic).
• Enable Periodic
Re-authentication
Permits immediate port re-authentication. The Setting Timer button opens the
Setting Timer screen to configure ports for 802.1x functionality.
Setting Timer