Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 364 –
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Console (config)# aaa authentication dot1x default none
5.29.2 dot1x system-auth-control
The dot1x system-auto-control command enables 802.1x globally. Use the no form of this command to disable 802.1x globally.
dot1x system-auto-control
no dot1x system-auto-control
Syntax
This command has no arguments or keywords.
Default Configuration
Disabled
Command Modes
Global configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example enables 802.1x globally.
Console (config)# dot1x system-auto-control
5.29.3 dot1x port-control
The dot1x port-control interface configuration command enables manual control of the authorization state of the port. Use the
no form of this command to return to the default setting.
Syntax
dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
auto — Enable 802.1X authentication on the interface and cause the port to transition to the authorized or unauthorized
state based on the 802.1X authentication exchange between the switch and the client.