Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 41 –
• Type The port types that comprise the LAG.
• Link Status Shows an active connection when you choose the UP button, there is no active
connection or the port has been taken offline by an Admiinistrator when you choose
the Down button
• Speed Shows the connection speed of the port and the speed can be configured only
when auto-negotiation is disabled on that port
• Duplex The port duplex mode, Full (transmission occurs in both directions simultaneously)
or Half (transmission occurs in only one direction at a time). This mode can be
configured only when auto-negotiation is disabled and port speed is set to 10Mbps
or 100Mbps.
• Flow control Shows the flow control status of the port. It is active when the port uses Full Duplex
Mode
• LAG Mode Shows the current mode of the LAG interface
Click the Detail button for more detail port configuration.
Linkl Aggregation detail configuration
At per-LAG detail configuration page, the administrator can select ports to be the members of the LAG interface. The scree
appears as follow: