Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 309 –
Syntax
crypto key pubkey-chain ssh
Default Configuration
By default, there are no keys.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the SSH Public Key-chain configuration mode.
Console(config)# crypto key pubkey-chain ssh
Console(config-pubkey-chain)#
5.22.7 user-key
The user-key SSH public key chain configuration command specifies which SSH public key is manually configured and enters
the SSH public key-string configuration command. To remove a SSH public key, use the no form of this command.
Syntax
user-key username {rsa | dsa}
no user-key username
username — Specifies the remote SSH client username, which can be up to 48 characters long.
rsa — RSA key.
dsa — DSA key.
Default Configuration
By default, there are no keys.
Command Mode
SSH Public Key Chain Configuration mode
User Guidelines
Follow this command with the key-string command to specify the key.
Example
The following example enables a SSH public key to be manually configured for the SSH public key chain called "bob".