Filter
Top Products
User’s Manual of WGSD-1022/WGSD-8000
- 337 –
--------------- ------------
172.16.1.1 Connected 49 No Global
Global 1
Global values
--------------
TimeOut: 3
Source IP: 172.16.8.1
OOB Source IP: 176.16.8.1
5.26 User Interface Commands
5.26.1 enable
The enable user EXEC command enters the privileged EXEC mode.
Syntax
enable [privilege-level]
privilege-level — Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how to enter privileged mode:
Console> enable
enter password:
Console#