Printronix Integrated Network Interface Card Network Card User Manual


 
Destinations/Queues
15
Destinations/Queues
For every I/O port on NIC, there is at least one pre-defined logical
print queue or destination to accept print jobs destined for it. This
includes print jobs that are sent directly to the I/O port, such as port
9100. These queue or destination names are pre-defined but can
be changed by the user.
Models
For every destination or queue, there is a pre-defined model
associated with it. The model defines how the print job will be
processed as it passes through to the printer. Models are a set of
mini filters that can be used to modify the print data stream. The
functions available for each model are as follows:
1. Insert carriage return after line feed
2. Insert a banner page before or after each print job
3. Insert header strings to
Print using upper tray’s paper
Printer using lower tray's paper
Print in landscape mode
Print in portrait mode
4. Insert trailer strings to
Reset the printer once the print job completes
Force the end of the job
Perform a form feed at the end of the data