Filter
Top Products
Windows NT 4.0 Or 2000 Host Setup Problems
275
The Ethernet cable is not plugged in or the printer is not turned
on. This message is a communication failure between the
NT/2000 server and the NIC. Check cabling, IP address
settings, gateway, etc.
• Test page does not print or prints incorrectly:
1. Is the printer online? Re-send test page.
2. The print queue name should be d1prn; however, the name
can be changed. To verify the queue names, print an E-Net
Test Page. Refer to your
User's Manual
for information.
3. The Printronix NT print driver requires P-Series emulation
active on the printer. The Generic/Text driver should print in
any printer emulation.
4. Delete then re-install the Microsoft TCP/IP Print service on the
server.
If you are still experiencing difficulty accessing or browsing the
printer, contact the Customer Solutions Center for further
assistance.