Q-Logic 3000 Switch User Manual


 
1–Switch Management Classes
QLGC_FCPortCapabilities : CIM_FCPortCapabilities
59223-03 E 1-11
QLGC_FCPortCapabilities :
CIM_FCPortCapabilities
There will be an instance of FCPortCapabilities for every port on the switch
hosting the CIMAgent. This class is used to determine the configuration options
for an FCPort. Port capabilities will vary by port, and may change for a given port
as a result of hardware or license changes.
Supported Properties and Methods
InstanceID
Opaque Identifier
ElementName
Property will contain the string “FC Port Capabilities”
ElementNameEditSupported
Property will contain a boolean value that will be TRUE if the
FCPort.ElementName property may be modified, or FALSE if the
property is read-only.
MaxElementNameLen
Property will contain the maximum string length of the
FCPort.ElementName property.
RequestedStatesSupported
Property will contain an array of one or more acceptable values for the
FCPort.RequestStateChange method.
Possible values are:
2-Enabled: Port is online.
3-Disabled: Port is offline
7-Test: Port is in diagnostics mode.
RequestedSpeedsSupported
Property will contain an array of one or more acceptable values for the
FCPortConfig.RequestedSpeed property.
Possible values are:
1062500000: 1Gbps
2125000000: 2Gbps
4250000000: 4Gbps
12750000000: 10Gbps (4channel)
8500000000: 8Gbps
25500000000: 20Gbps
Port speed configuration is not affected by GBIC capabilities. That is, a
4-Gbps port may be configured to 4-Gbps even if a -2Gbps GBIC is
installed.