Q-Logic 3000 Switch User Manual


 
1–Switch Management Classes
QLGC_FCPortSettings : CIM_FCPortSettings
59223-03 E 1-13
DeviceScanConfigurable
Property will contain a boolean value that will be TRUE when the
FCPortSettings.DeviceScan property may be edited, or FALSE if the
property is read-only.
Supported WBEM Operations
getClass
getInstance
enumerateInstances
enumerateInstanceNames
Associations
QLGC_FCPortElementCapabilities : CIM_ElementCapabilities
1to1 relationship to QLGC_FCPort
QLGC_FCPortSettings : CIM_FCPortSettings
There will be an instance of FCPortSettings for every port on the switch hosting
the CIMAgent. This class is used to change the port configuration used on reset
and startup. Changing the configuration also causes the current port settings to be
set to the new configured value.
Supported Properties and Methods
InstanceID
Opaque Identifier
ElementName
Property will contain the string “FC Port Settings”
RequestedSpeed
Property will contain the configured port speed. This value will be
ignored if the AutoSenseSpeed property is TRUE. The active port
speed is reported in the FCPort.Speed property. Valid values are
reported by the RequestedSpeedsSupported property of the
corresponding FCPortCapabilities instance.
Possible values are:
1062500000: 1Gb
2125000000: 2Gb
4250000000: 4Gb
12750000000: 10Gb (4channel)
8500000000: 8Gbps
25500000000: 20Gbps