1–Switch Management Classes
QLGC_FCPortCapabilities : CIM_FCPortCapabilities
1-12 59223-03 E
AutoSenseSpeedConfigurable
Property will contain a boolean value that will be TRUE if the
FCPortConfig.AutoSenseSpeed property may be configured, or
FALSE if the property is read-only.
RequestedTypesSupported
Property will contain an array of one or more acceptable values for the
FCPortConfig.RequestedType property.
Possible values are:
2-G: Port may act as an E or F port.
3-GL: Port may act as an E, F, or FL port.
5-F: Port may only act as an F port.
6-FX: Port may act as an F or FL port.
16000-Donor: Port may not connect, it donates its credits for
use by another port.
QLogic Extended Properties and Methods
SupportedIOStreamGuardStates
Property will contain an array of acceptable values for the
FCPortSettings.IOStreamGuard property.
Possible values are:
1 – AutoSense: Port will enable IOStreamGuard if connected to
an Initiator.
2 – Enable: Suppresses the reception of RSCN messages from
other ports for which I/O Stream Guard is enabled.
3 – Disable: Allows free transmission and reception of RSCN
messages.
SupportedPerformanceTuningModes
Property will contain an array of acceptable values for the
FCPortSettings.PerformanceTuningMode property. If the array
contains fewer than 2 entries, the mode is not configurable. Supported
values are:
1 – AutoSense
2 – None
3 – MFS: Multi-frame sequence interleaving is suppressed.
4 – VI: Enable support for VI frames.
5 – LCF: Preference routing for link control frames.
6 – VI-LCF: Enable both VI and LCF