Q-Logic 3000 Switch User Manual


 
1–Switch Management Classes
CIM_ConfigurationData : CIM_SettingData
59223-03 E 1-25
Returns:
0: Success
5: Invalid Parameter. One or more parameters do not conform
to the parameter limitations above.
16000: Validate Only Request Not Supported; ValidateOnly
must be FALSE
16001: ConfigurationData is invalid; Validation failure during
while applying configuration.
16002: Element Does Not Support Initial/Default Configs;
TypeOfConfiguration must be 2
16003: Element Does Not Support Possible Configs/Config;
TypeOfConfiguration must be 2
16005: Element Cannot Be Configured; Probably the result of
an invalid ManagemedElement parameter.
Request Status Codes:
CIM_ERR_ACCESS_DENIED: User does not have
authorization for this command, or another user is configuring
the switch, retry later.
CIM_ERR_INVALID_PARAMETER: One or more required
parameters are missing.
CIM_ERR_NOT_FOUND: The ConfigurationData instance was
not found.
ElementName
Property will contain the string “Switch Configuration Image”
InstanceID
Opaque Identifier
Supported WBEM Operations
getClass
getInstance
enumerateInstances
enumerateInstanceNames
createInstance
invokeMethod
Associations
QLGC_FCSwitchConfigurationData : CIM_ElementSettingData
1to1 relationship to QLGC_FCSwitch