1–Switch Management Classes
QLGC_FCSwitchSettings : CIM_FCSwitchSettings
1-18 59223-03 E
QLGC_FCSwitchSettings :
CIM_FCSwitchSettings
There will be one instance of FCSwitchCapabilities representing the configuration
of the switch hosting the CIMAgent.
Supported Properties and Methods
InstanceID
Opaque Identifier
ElementName
Property will contain the string “FC Switch Settings”
PreferredDomainID
Property will contain the configured domainID. The configured
domainID will match the Active domainID if the value of
DomainIDLocked property is TRUE. This property may be edited if the
value of the related FCSwitchCapabilities.EditPreferredDomainID
property is TRUE. The value must be within the range expressed by
the FCSwitchCapabilities.MinDomainID and
FCSwitchCapabilities.MaxDomainID.
DomainIDLocked
Property will contain the configured DomainIDLocked setting. If TRUE,
the switch MUST use the PreferredDomainID, and domainID conflicts
within a fabric are resolved by segmenting the fabric. If FALSE, the
switch will use the preferred domainID where possible, and fail over to
an available domainID in the event of a domainID conflict. This
property may be edited if the value of
FCSwitchCapabilities.EditDomainIDLocked property is TRUE.
PrincipalPriority
Property will contain an enumerated principal priority configuration for
the switch. Valid values for this property are reported by the
PrincipalPrioritiesSupported property of the corresponding
FCSwitchCapabilities instance.
Possible values are:
2-Principal: (FC-SW2)Switch_Priority=1
3-Subordinate: (FC-SW2)Switch_Priority=255
4-Any: (FC-SW2)Switch_Priority=254