Filter
Top Products
2–Fabric Discovery Classes
QLGC_FCPort : CIM_FCPort
2-4 59223-03 E
QLGC_FCPort : CIM_FCPort
There are three distinct groups of FCPort objects:
Local Switch Ports
These are the ports that are attached to the switch that hosts the
CIMAgent. Ports that are not licensed or not installed or, in the case of
a blade about to be removed, powered off are not instantiated.
Remote Switch Ports
These are ports on other switches in the fabric. The CIMAgent is only
able to report information about these ports that is exposed by the
Fabric Configuration Service on the remote switch.
Switch ports are associated to an aggregating FCSwitch object.
NS Ports
These are device ports that have registered themselves with the name
server when they logged into the fabric. The device may be linked
with any switch in the fabric. NS ports will be associated with an
aggregating FCNode object.
Supported Properties and Methods
CreationClassName
Property will contain the string “QLGC_FCPort”
DeviceID
Opaque identifier
SystemCreationClassName
(Local/Remote) Property will contain the string
“QLGC_FCSwitch”
(NS)Property will contain the string “QLGC_Fabric”
SystemName
(Local/Remote)Property will contain the switch WWN
(NS) Property will contain the WWN of the principal switch in
the fabric.
ElementName
Property will contain a user friendly string identifying the port. The
property may be modified for ports local to the switch if the associated
FCPortCapabilities.ElementNameEditSupported property is TRUE.
(Local/Remote)“Port <portno>”
(NS) Port Symbolic Name, if any was registered with
Nameserver.
LinkTechnology
Property will contain the enumerated value 4=FC (FibreChannel)