Filter
Top Products
2–Fabric Discovery Classes
QLGC_FCPort : CIM_FCPort
59223-03 E 2-5
NetworkAddresses
(Local/Remote)Property will be NULL
(NS)Property will contain the FibreChannel address identifier
(FCID) formatted as 6 uppercase hex digits.
OperationalStatus
Operational Status is an array containing a single value as follows. It
represents the operational status of the port, not the configured port
settings. Supported values are:
(Local/Remote)
00-Unknown: Remote port state is unknown, and/or port is not
installed.
02-OK: Port is ONLINE and passing traffic.
06-Error: Error trying to link to remote device or switch, or boot
diagnostic error.
10-Stopped: Port is operationally OFFLINE as a result of either
not being connected to anything, or as a result of being
disabled (configured “OFFLINE” or “DOWN”).
11-InService: Port has been configured to a diagnostic state.
(NS)
0-Unknown
PermanentAddresses
Property will contain the port WWN.
PortType
Port Type represents the value negotiated during the port login
procedure. It does not represent the configured port type. Supported
values are:
00-Unknown: (Local/Remote) G/GL port is not linked, or data is
unknown.
10-N: (NS) Node Port
11-NL: (NS) Node Port in FC-AL mode
14-E: (Local/Remote) Fabric Expansion port linked to another
switch.
15-F: (Local/Remote) Fabric Port linked to an N port.
16-FL: (Local/Remote) Fabric Port linked to one or more NL
ports via FC-AL.
16000-Donor (local) Port is in Donor Mode and is unusable