Filter
Top Products
2–Fabric Discovery Classes
QLGC_FCSwitch : CIM_ComputerSystem
59223-03 E 2-11
QLGC_FCSwitch : CIM_ComputerSystem
The switch “System” is represented by an instance of FCSwitch. This class is
required in both the fabric profile and the switch profile.
Supported Properties and Methods
CreationClassName
Property will contain the string “QLGC_FCSwitch”
Name
Property will contain the switch WWN.
ElementName
Property will contain the Switch Symbolic Name. The property may be
edited if FCSwitchCapabilities.ElementNameEditSupported is TRUE.
NameFormat
Property will contain the string “WWN”.
OtherIdentifyingInfo
Property will contain an array with a single string element representing
the domainID of the switch. The domainID is formatted as a decimal
value.
OperationalStatus
Property will contain an array of enumerated values that represent
both the configured state and the operational status of the switch. The
zero position in the array will contain the one of the following exclusive
values:
02-OK: All the switch ports have been enabled (ONLINE) and
the switch passed boot diagnostic test.
03-Degraded: The switch is working but a fault has been
detected.
06-Error: The switch is not working properly.
10-Stopped: All the switch ports have been disabled (OFFLINE
or DOWN).
11-InService: All the switch ports have been placed into
diagnostic mode.
Property may also contain a combination of the following values:
05-PredictiveFailure: A system failure is likely.
32768-FW_POST_FAIL: Power-On Self Test failure
32769-HW_MP_ACCESS: Failed to access eeprom on MP.