Filter
Top Products
B – Command Line Interface
Zoning Command
59042-01 A B-75
Zoning Command
Opens a Zoning Edit session in which to create and manage zone sets and zones.
Refer to the ”Zone Command” on page B-68 and the ”Zoneset Command” on
page B-72.
Authority Admin. The List keyword is available with User authority.
Syntax zoning
active
cancel
clear
edit
history
limits
list
restore
save
Keywords active
Displays membership information for the active zone set including member zones
and zone members.
cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the keyword does not
affect the non-volatile zoning database. However, if you enter the Zoning Clear
command followed by the Zoning Save command, the non-volatile zoning
database will be cleared from the switch. The preferred method for clearing the
zoning database from the switch is the Reset Zoning command.
edit
Opens a Zoning Edit session.
history
Displays a history of zoning modifications including the following:
■ Time of the most recent zone set activation or deactivation and the user who
performed it
■ Time of the most recent modifications to the zoning database and the user
who made them.
■ Checksum for the zoning database
limits
Displays the maximum limits imposed on the zoning database for the number of
zone sets, zones, aliases, members per zone, members per alias, and total
members.