Q-Logic 8C Switch User Manual


 
B Command Line Interface
Help Command
59042-01 A B-11
Help Command
Displays a brief description of the specified command and its keywords.
Authority User
Syntax help [command] [keyword]
Keywords [command]
A command name. If you omit this value, the system displays all available
commands from which to choose.
[keyword]
A keyword associated with the command named by [command]. If you omit this
value, the system displays the available keywords for the specified command.
all
Displays a list of all available commands (including command variations).
Examples The following is an example of the Help Set command:
SANbox2 $> help set
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
set alarm
set beacon
set blade
set config blade
set config port
set config ports
set config switch
set config threshold
set config zoning
set log
set pagebreak
set port
set setup snmp
set setup system
set switch
The following is an example of the Help Set Beacon command:
SANbox2 #> help set beacon
set beacon On | Off
This command allows the lights on the front of the switch to flash.
The On option will start and the Off option will stop the flashing.