3–Configuration
Identifying QLogic Adapters on VMware ESX/ESXi 4.0
3-2 FC0054607-00 A
To identify QLogic Fibre Channel and Converged Network Adapters using
vSphere:
1. Start vSphere Client and select the host you want.
2. Click the Configuration tab to bring the Configuration page to the front.
3. Under Hardware on the left, click Storage Adapters.
A list of all storage adapters configured on the system appears, including
QLogic Fibre Channel and Converged Network Adapters, as shown in
Figure 3-1.
Figure 3-1 vSphere Client Configuration Page
Using Console OS
You can use the console OS to identify QLogic Fibre Channel and Converged
Network Adapters on a VMware ESX/ESXi 4.0 system.