Q-Logic FC0054607-00 A Network Hardware User Manual


 
3–Configuration
Verifying That the Driver is Loaded
3-6 FC0054607-00 A
Select Host Adapter setting enables you to select a specific adapter, if you
have multiple Fibre Channel or Converged Network Adapters in your
system, and then configure or view the adapter’s settings.
The Fast!UTIL BIOS utility is described in detail in the BIOS Readme file on the
QLogic Driver Downloads / Documentation page (in the Boot Code section) for
your adapter:
http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/default.aspx
Verifying That the Driver is Loaded
Follow this procedure to ensure that the QLogic Fibre Channel or Converged
Network Adapter driver is loaded on the VMware ESX/ESXi 4.0 system.
To verify that the QLogic Fibre Channel or Converged Network Adapter
driver is loaded:
1. Log in to the service console as root user.
2. Execute the following command:
$ vmkload_mod -l
For proper operation, ensure that the Qlogic driver shows Yes in the
Loaded column. Figure 3-3 an example of the output.