Filter
Top Products
A–Troubleshooting
Troubleshooting with Driver Logs
A-6 FC0054607-00 A
Table A-6 lists the more common driver log messages and provides an
explanation of each.
Table A-6. Common Driver Log Messages
"qla2xxx <dev driver string>: Found an ISPXXXX, irq yyy, iobase zzz"
Driver is reporting which adapter it has found during initialization.
"qla2xxx <dev driver string>: Verifying loaded RISC code..."
Driver is reporting that it has verified the RISC code and it is running.
"qla2xxx <dev driver string>: LIP reset occured (f8f7)."
Driver received a LIP async event from the firmware.
"qla2xxx <dev driver string>: LOOP UP detected (4 Gbps)."
Driver received a loop up async event from the firmware.
"qla2xxx <dev driver string>: LOOP DOWN detected."
Driver received a loop down async event from the firmware.
"scsi(%d): Asynchronous P2P MODE received."
Driver received a point-to-point async event from the firmware.
"qla2xxx <dev driver string>:....QLogic Fibre Channel HBA Driver:
8.02.01-k1-vmw41-debug......QLogic QLExxxx - PCI-Express Dual Channel NGb
Fibre Channel HBA..."
Driver is reporting information discovered during its initialization. This information includes the board ID,
firmware version, and driver version.
"qla%d Loop Down - aborting ISP"
Indicates driver is attempting to restart the loop by resetting the adapter. Usually done by the driver when
sync is not detected by the firmware for a long time (4+ minutes), and usually means that the adapter
port is not connected to the switch or loop.
"qla2xxx <dev driver string>: ISP System Error - mbx1=%x, mbx2=%x, mbx3=%x"
Driver received an async ISP system error event from the firmware. Additional information follows the
message (that is, mailbox values from the firmware).
"qla2xxx <dev driver string>: Configuration change detected: value %d."
Driver received a change in connection async event from the firmware. Additional information follows the
message (that is, mailbox 1 value from the firmware).
"scsi(%d): Port database changed"
Driver received a port database async event from the firmware.