Filter
Top Products
3–Configuration
Identifying QLogic Adapters on VMware ESX/ESXi 4.0
FC0054607-00 A 3-3
To identify QLogic Fibre Channel and Converged Network Adapters using
console OS:
1. Discover the device using lspci.
2. To list the subdirectories, run the following command:
ls /proc/scsi:
If the qla2xxx directory is present, QLogic adapters are installed on the
VMware ESX/ESXi 4.0 system.
3. To list the QLogic storage adapters present on the system, run the following
command:
ls /proc/scsi/qla2xxx
An example output may be:
# ls /proc/scsi/qla2xxx/
1 2 3 4 5 6 HbaApiNode
4. To view additional details, run the following command:
cat /proc/scsi/qla2xxx/<adapter_number>
Where <adapter_number> is one of the adapter numbers shown in
Step 3.
This command lists the driver’s supported features and its current state, in
addition to its firmware/driver and boot code versions, as shown in
Figure 3-2.