RAD Data comm IPmux-1 Network Card User Manual


 
Chapter 3 Operation IPmux-1/1E Installation and Operation Manual
3-10 Overview of Menu Operations
Main Menu
Figure 3-8 shows the IPmux-1/1E Main Menu. Access all system configuration and
control functions via this menu.
At any point and from any screen, you can press <Esc> repeatedly, backing up
until you reach the main menu.
You exit the program only from this menu. In order to prevent unauthorized
access, it is recommended that when you finish a session, you return to the Main
Menu and type 4 to exit the program. A password is then required for reentry.
MAIN MENU
1.System >
2.Configuration >
3.Performance Monitoring >
4.Exit
Select item from the menu: _
Use keys <1> to <4>
Figure 3-8. IPmux-1/1E Main Menu
The Main Menu options are:
1. System View and modify system parameters
2. Configuration Define system configuration
3. Performance Monitoring Monitor system performance
4. Exit Exit the control software
System Menu
To access the System menu:
Type 1 (System) in the Main Menu.
From the System menu you can view and configure the following options:
1. General Information View IPmux-1/1E general information.
2. Self-Test Results Review self-test results obtained during system
power-up.
3. Reset Reset IPmux-1/1E.
4. Event Log View a list of IPmux-1/1E events.
5. Ping Ping other network devices.
These options are explained in full detail in Appendix E.
Main Menu
1. System
Order from: Cutter Networks
Ph:727-398-5252/Fax:727-397-9610
www.bestdatasource.com