Filter
Top Products
This window displays and sets the breakpoints. Items that can be displayed in the sheet are listed
below.
[Type] Breakpoint
[State] Whether the breakpoint is enabled or disabled
[Condition] An address that the breakpoint is set
Address = Program counter (Corresponding file name, line, and symbol name)
[Action] Operation of the emulator when a break condition is satisfied
Break: Halts execution
When a breakpoint is double-clicked in this window, the [Set Break] dialog box is opened and
break conditions can be modified.
A popup menu containing the following options is available by right-clicking within the window.
5.4.5 Add
Sets breakpoints. Clicking this item will open the [Set Break] dialog box and break conditions can
be specified.
5.4.6 Edit
Only enabled when one breakpoint is selected. Select a breakpoint to be edited and click this item.
The [Set Break] dialog box will open and break conditions can be changed.
5.4.7 Enable
Enables the selected breakpoint(s).
5.4.8 Disable
Disables the selected breakpoint(s). When a breakpoint is disabled, the breakpoint will remain in
the list; when specified conditions have been satisfied, a break will not occur.
5.4.9 Delete
Removes the selected breakpoint. To retain the details of the breakpoint but not have it cause a
break when its conditions are met, use the Disable option (see section 5.4.8, Disable).
5.4.10 Delete All
Removes all breakpoints.
80