Filter
Top Products
Sending Your Identification at the Top of Your Message
Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
NOTE: If you switch TTI off, the image received at the other end will be unmarked.
1. Press the key until " "
is displayed.
2. Press the Yes key.
3.
Press the and the keys until the dis-
played setting is correct.
4. Press the Yes key.
Cross-reference
TTI: see page 19
Changing Transmission Mode (Type I Only)
Converting Immediate Transmission to Memory Transmission
If there is a message still waiting in the document feeder, you can convert it into
memory file. Press the Line Select key to make sure that the machine is in
Memory Transmission mode, then press the Start key. The document will be
scanned and stored into memory, leaving the document feeder free for others to
use.
Memory Transmission as Your First Choice
The default mode of your machine is Immediate Transmission. If you wish, you
can change this home position to Memory Transmission.
The procedure is as follows. If you need more information about the User
Parameter settings adjustment procedure, see page 102.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
❐ At this time, you can print a User Parameter List, if
you press the key, then press the Yes key.
Changing Transmission Mode (Type I Only)
46