Filter
Top Products
Power Failure Report (Type I Only)
This report is printed if the machine’s power was off long enough to erase the
memory. The report gives details of the files that were lost. With this information,
you may store messages for transmission again, and contact the senders of any
received messages that were lost.
Polling Clear Report (Type I Model)
This is printed after a polling file has been erased from memory.
SWITCHING REPORTS ON/OFF
Some of these reports can be switched on or off. To switch a report on or off, do
the following (see page 102 if you need more information about User Parameter
settings adjustment procedure).
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
2. Press the Yes key. The settings for
Switch 00 are now displayed.
3.
Press the and keys until the settings
for Switch 03 are displayed.Each digit
from 0 to 7(except digit 1) controls a re-
port.
Switch 03
Digit Purpose
0
Communication Result Report (Memory Transmission)
(Type I Only) 0: Off 1: On
1 Do not change this setting.
2
File Reserve Report (Memory Transmission)
(Type I Only) 0: Off 1: On
3 File Reserve Report (Polling Reception) 0: Off 1: On
4
Communication Result Report (Polling Recption)
0: Off 1: On
5
Transmission Result Report
(Immediate Transmission) 0: Off 1: On
6 Polling Clear Report (Type I Only) 0: Off 1: On
7 TCR 0: Off 1: On
SWITCHING REPORTS ON/OFF
86