Filter
Top Products
Preventing a Wrong Connection (ID Transmission)
This feature helps to stop you from accidentally sending a fax messages to
terminal that is outside your network. The ID codes of the communicating
machine are checked. If they are not the same the communication is stopped.
The ID code is the same as the polling ID.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
❐ At this time, you can print a User Parameter List if
you press the Start key.
2. Press the Yes key. then press the key
until the settings for switch 6 are shown.
The setting that you need to change is
that for digit 2.
3. If you wish to change the setting, press
2 using the ten keypad.
4. Finish: Press the Yes key, then press
the Function key.
Cross-reference Polling ID:See page 76
Digit 2
0: ID Transmission Off
1: ID Transmission On
TRANSMISSION
64