Filter
Top Products
4. If you wish to change the setting, press
the appropriate key on the keypad.
6. Finish: Press the Yes key, then press the Function key.
NOTE: To switch the Error Report on or off, contact a service technician.
PRINTING A SAMPLE OF DATA ON THE REPORTS
This feature is only available on the Type I model.
For reference purposes, the machine can print the first few inches of the fax
message on the following reports:
❐ Communication Result Report
❐ File Reserve Report
❐ Communication Failure Report
❐ Polling Clear Report
The procedure to switch this feature on or off is as follows (see page 103 if you
need more information about the User Parameter settings adjustment procedure):
1. Press the Function key and
6,2,2,2,2,6,3, using the ten keypad, then
press the Yes key.
2. Press the Yes key. The settings for
switch 00 are now displayed.
3.
Press the key until the settings for
Switch 04 are displayed.
4. The setting that you need to change is
digit 7. If you wish to change the setting,
press 7 using the ten keypad.
6. Finish: Press the Yes key, then press
the Function key.
REPORTS
digit 7 6 5 4 3 2 0
Digit 7
0: This feature is Off
1: This feature is On
PRINTING A SAMPLE OF DATA ON THE REPORTS
87