Filter
Top Products
Switching Local Printing On/Off
When you switch Forwarding on, messages your machine forwards are not
printed. If you wish, you can also print them from your machine.
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
2.
Press the Yes key, then press the key
until the settings for Switch 11 are dis-
played. Change the setting of digit 6.
3. If you wish to change the setting, press
6 using the ten keypad.
4. Finish: Press the Yes key, then press
the Function key.
NOTE: When turned on and your machine fails to forward a message (for exam-
ple if the line is busy), you will still have printed copy.
Enabling and Disabling the Forwarding Mark
The forwarding mark is printed at the receiving end on the top of each page of the
fax messages that are forwarded from your machine. This mark will help the
operator at the other end to recognize messages that have been forwarded. If you
wish, you can switch this mark off.
To switch the Forwarding Mark on or off, do the following procedure (See page
100 if you need more information about the User Parameter settings adjustment
procedure).
1. Press the Function key and
6,2,2,2,2,6,3 using the ten keypad, then
press the Yes key.
2. Press the Yes key, then press the and
the keys until the settings for Switch
02 are displayed. Change the setting of
digit 0.
3. If you wish to change the setting, press
0 using the ten keypad.
4. Finish: Press the Yes key, then press
the Function key.
Digit 6
0: Local Printing Off
1: Local Printing On
Digit 0
0 Fowarding Mark Off
1 Fowarding Mark On
RECEPTION
74