Filter
Top Products
5. Press the Yes key.
6. Press the Yes key. The document be-
gins to be scanned.
7. Either
❐ Enter the label: Press the Yes key.
❐ Otherwise: Press the No key. Go to
step 10.
8. Enter the label for this Auto Document.
9. Press the Yes key. If the display is not
as opposite, press the Yes key again.
10.Press the Function key.
NOTE: You can program a Quick Dial number and the Auto Document in the
same Quick Dial key. If you program the key as a Quick Dial before pro-
gramming the Auto document the display below will appear in Step 4. If
you press the Yes key, Whenever you press the Quick Dial key, the Auto
Document will be attached to that transmission.
Using a Program
1. Make sure that the machine is in standby mode. (see page 6)
2. If you wish to attach a fax message to your Auto Document, place the
document face down into the feeder.
3. Press the programmed Quick Dial key.
Example: Quick Dial key 08
4. Dial the number, then press the Start
key.
ADVANCED
FEATURES
TRANSMISSION
59