Filter
Top Products
Troubleshooting
86
5
Cannot scan to send fax message
as scanner is in use for other
function.
The Copy or Document Server function is in
use. To cancel the job in process, do the follow-
ing, and then try faxing again.
Press [Exit], and then press the {
{{
{Copy}
}}
} or {
{{
{Doc-
ument Server}
}}
} key. Next press the {
{{
{Clear/Stop}
}}
}
key. When the message “
[Stop] key was
pressed.Stop copying?
” or “
[Stop]
key was pressed. Stop storing?
”
appears, press [Stop].
Destination list / machine set-
tings are updated. Selected
destinations or function set-
tings have been cleared. Please
re-select the settings.
Wait with the main power switch on. The ma-
chine will enter standby mode after it exits
from RDS mode.
Check whether there are any
network problems.
[13-10]
Check if the alias telephone number is correct-
ly programmed.
• Check the alias telephone number is cor-
rectly programmed using the Web brows-
er. See the Web browser's Help.
• Consult your network administrator.
Check whether there are any
network problems.
[13-11]
Cannot access gatekeeper.
• Use your Web browser to check the gate-
keeper address is correctly programmed.
See the Web browser's Help.
• Consult your network administrator.
Check whether there are any
network problems.
[13-17]
Registering of user name is rejected by SIP
server.
• Use your Web browser to check the SIP
server address and user name are correctly
programmed. See the Web browser's Help.
• Consult your network administrator.
Check whether there are any
network problems.
[13-18]
Cannot access to SIP server.
• Use your Web browser to check the SIP
server address is correctly programmed.
See the Web browser's Help.
• Consult your network administrator.
Message Causes and solutions
ThemisC1_Fax_GB-F_FM.book Page 86 Wednesday, November 24, 2004 7:09 PM