Filter
Top Products
Settings You Can Change with User Tools
59
4
❒ The mark is displayed next to the paper tray if “No” is selected.
❒
The optional tab sheet holder is required when using tab stock in tray 2 or 3.
❒ The number of tab stock shifts can be set in millimeters, when [
Tab Stock
]
has been selected.
❒ The number of tab stock shift can be set in 1 millimeter (1 inch) units, with-
in a range of 0 to 15 mm (0" to 0.6"). The default is 13 mm (0.5").
❒ “Thick Paper” and “Tab Stock” can be set simultaneously.
Limitation
❒ [Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid.
❖
❖❖
❖ Front Cover Sheet Tray, Back Cover Sheet Tray
You can specify and display the paper tray that is used to set cover sheets. Af-
ter selecting the paper tray, you can also specify the display timing and copy
method for two-sided copying.
Note
❒ Default:
• Tray to Program: Off
❒ Functions using the Cover Sheet Tray setting are front cover function and
front/back cover function.
❒ When [At Mode Selected] is selected, the cover sheet tray settings are only
displayed when the cover function or slip sheet function is selected.
❒ You can set Copying Method in Duplex setting only when [At Mode Select-
ed
] is selected.
Reference
"Covers", Copy Reference
❖
❖❖
❖ Slip Sheet Tray, Designation Sheet Tray 1/2
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided cop-
ying.
Note
❒ Default:
• Tray to Program: Off
❒ When [
At Mode Selected
] is selected, the slip sheet settings are only dis-
played when the cover function or slip sheet function is selected.
❒ When [
Interposer Tray
] has been selected in the Slip Sheet 2 tray settings,
“Copying Method in Duplex” will not be displayed.
❒ OHP slip sheets cannot be copied when using the interposer.
Reference
“Slip Sheets”, Copy Reference
VenusC1_GB_zen_Pre_FM.book Page 59 Tuesday, January 17, 2006 3:27 PM