Filter
Top Products
5
Squeeze both locks to open the unit. Open the unit to empty the used
toner bottle and to remove jammed paper.
Open the cover(and the unit) to access the toner cartridge.
Place your original here, face up. If you want to copy a stiff original
that can’t be bent, use the Rear Table (see 6).
Use the guide to keep the original going straight as you feed the origi-
nal into the copier.
See page 6.
Place stiff originals here, face down.
Feeds paper from a roll to the copier.
Use the guides to keep the copy paper going straight as you feed the
into the copier.
Open this table if you are copying to sheets, changing the toner car-
tridge, or if you have to open the copier.
Open these covers to change the roll of paper and to clear paper jams.
Holds your copier and the Roll Feeder.
Turn to start the copier and off when you’re done for the day. The
copier will need about 5 minutes to warm up, if it’s been turned off for
a long time.
Makes sure the copies don’t fall off as they come out.
1a & 1b Locks
2. Front Cover
3. Original Table
4. Original Guides
(option)
5. Operation Panel
6. Rear Table
7. Roll Feeder (option)
8. Paper Guides (option)
9. Copy Paper Table
10.Roll Feeder Covers
11.Table (option)
12.Main switch
13.Copy Exit Guide