Filter
Top Products
5
1a. & 1b. Locks Squeeze both locks to open the unit. Open the unit to empty the
used toner bottle and to remove jammed paper.
2. Front Cover Open the cover(and the unit) to access the toner cartridge.
3. Original Guide Use the guide to keep the original going straight as you feed the
original into the copier.
4. Original Table Place your original here,
face down, and the original will come out
from here after it is copied. If you want to copy a stiff original that
can’t be bent, use the Rear Table (see 6).
5. Operation Panel See page8.
6. Rear Table Place stiff originals here,
face down.
7. Roll Feeder(option) Feeds paper from a roll to the copier.
8. Paper Guides(option) Use the guides to keep the copy paper going straight as you feed
the paper into the copier.
9. Bypass Table Open this table if you are copying to sheets, changing the toner
cartridge, or if you have to open the copier.
10. Roll Feeder Covers Open these covers to change the roll of paper and to clear paper
jams.
11. Table(option) Holds your copier and the Roll Feeder.
12. Main Switch Turn to start the copier and off when you’re done for the day. The
copier will need about 5 minutes to warm up, if it’s been turned off
for a long time.
13. Copy Stacker (option) Delivers copy in the front of the machine or stock it in the back.