Filter
Top Products
10
RECOMMENDED PAPER
❐ Standard paper sizes that can be used in this copier are shown below.
❐ When you make a copy on a non-standard size of paper, set the paper on the Copy Paper Table.
❐ Weight of paper suitable for this copier: 51g/m
2
, 14lb to 134g/m
2
, 36lb.
❐ Do not use the following kinds of paper or a paper jam might occur.
• Bent, folded, or creased paper
• Torn paper
• Perforated paper
• Non-smooth paper
• Slippery paper
• Thin paper that has low stiffness
❐ Do not make a copy on paper with any kind of coating, such as thermosensitive paper, art paper,
aluminium foil, and carbon paper.
A fault might occur.
❐ Do not use paper with strong curls at the edges or corners. (Curls rising more than 5mm(1/4”) or
falling more than 20mm (3/4”) over a 40mm (1.5”) radius.)
❐ When you make copies on film, take out the copies delivered to the copy guide one sheet at a time
and place them on a flat surface.
Metric version Inch version Bypass Roll Feeder
A0 E (36” × 48”)
KK
A1 D (24” × 36”)
KL KL
A2 C (18” × 24”)
KL KL
A3 B (12” × 18”)
KL KL
A4 A ( 9” ×12”)
KK