Filter
Top Products
When Nozzle Clogging Cannot Be Solved
4-24
2
Select the [CHECK] by pressing key.
3
Press the key.
• The mode for which nozzle recovery is invalid is displayed.
• If there is no mode for which nozzle recovery is invalid, “NONE” is
displayed.
4
Press the key several times to end the setting.
Reset the set value
1
Select [NOZZLE RECOVERY] of the maintenance menu.
(1) Press the key in LOCAL.
(2) Press to select [MAINTENANCE] and press the key.
(3) Press to select [NOZZLE RECOVERY].
(4) Press the key.
2
Select the [RESET] by pressing key.
3
Press the key.
4
Select the Nozzle line that needs clear the setting
value by pressing key. Then press
key.
5
Press the key.
6
Press the key several times to end the setting.
NOZZ LE RECOVERY
:CHECK
UNRECOVERABLE COND .
:1200x1200 24p/H Lv1
Level at printing
white layer
Resolution
Number of passes
Scanning speed
NOZZ LE RECOVERY
:RESET
SELECT RESET NOZZLE
:H1-A
SELECT RESET NOZZLE
:H1-A
H1- A RESET
EXECUTE [ ENT ]