Filter
Top Products
3-12
Setting the Display of Media Residual
Whether the screen displays the remaining amount of a media is set.
1
Press the key in LOCAL.
2
Press to select [MACHINE SETUP].
3
Press the key.
4
Press to select [MEDIA REMAIN].
5
Press the key.
6
Press to select ON/OFF.
7
Press the key.
8
Press the key several times to end the setting.
When the media remaining amount
display is turned to "ON"
the remaining amount of a media is displayed in Remote.
(However, when a leaf media is used, the length of the media to be
printed is displayed.)
When the media remaining amount
display is turned to "OFF"
the remaining amount of a media is not displayed in the Remote.
• The amount of a media that has been fed by the printing and jog keys is reflected in the remaining
amount of a media.
• The length of a media (initial value of the remaining amount) is entered when a roll media is
detected.( P.2-12)
• The setting configured here does not become effective unless media detection is performed after the
setting has been complete.
FUNCT ION
SETUP [ENT ]
FUNCT ION
MACH I NE SETUP [ ENT ]
MACH I NE SETUP
AUTO Powe r - o f f [ ENT ]
MACH I NE SETUP
MED I A REMA I N [ ENT ]
MED I A REMA I N
:OFF
MED I A REMA I N
:ON
MACH I NE SETUP
MED I A REMA I N [ ENT ]