Filter
Top Products
2-4
Turning the Power ON/OFF
Turning the Power OFF
When having ended the operation of the machine, turn the power OFF by pressing the power switch located on
the front side.
Check the following items when turning the power OFF.
• If the machine is receiving data from the PC or if there is any data that has not been output yet
• If the head has returned to the capping station
• If any error has occurred （ P.5-14 “Error messages”
）
1
Turn OFF the power of the connected PC.
2
Press the power switch to turn the power OFF.
• Do not turn OFF the main power switch located on the side
of the machine.
• To use this machine again, light the green lamp by pressing
the power switch.
Cautions about Turning the Power OFF
Q Do not turn the main power switch OFF.
When the main power switch is ON, the power periodically turns ON and the nozzle clogging prevention
function (flushing function) operate.
When the main power switch has been turned OFF, the auto maintenance functions, such as flushing, do
not operate, and this may cause nozzle clogging.
Q Keep the front cover and the maintenance cover closed.
If the cover is opened, the auto maintenance function such as the flushing function does not work.
Q Turn the power OFF after having checked the position of the head.
If the power is turned OFF in a state where the head has not returned to the capping station, the head
dries, which may cause nozzle clogging.
In this case, turn the power ON again and check that the head has returned to the capping station, and
then turn the power OFF.
Q Do not turn the power OFF during printing.
The head may not return to the capping station.
Q After having turned the power switch OFF, turn the main power switch OFF.
When turning the main power switch off for moving the machine or for solving the error or the like, press
the power switch on the front of the machine, check the display is turned off on the operation panel, and
then turn the main power switch off.
Power switch