Filter
Top Products
1-10
Connecting Cables
Connecting USB2.0 Interface Cable
Connect the PC and this machine with the USB2.0
interface cable.
Notes on USB 2.0 Interface
z When two or more Pro L4160/L4130 machines are connected to one personal computer
When two or more Pro L4160/L4130 machines are connected to one personal computer, the personal
computer may not recognize all the Pro L4160/L4130 machines normally.
Reconnect the unrecognized Pro L4160/L4130 machine to another USB port, if available, and check to see if it
is recognized.If the Pro L4160/L4130 machine is not recognized by the newly connected USB port, use USB
2.0 repeater cables available on the market.
z Notes on peripheral devices in USB high speed mode
When a peripheral device (USB memory or USB HDD) to be operated in USB high speed mode is connected to
the same personal computer that a Pro L4160/L4130 machine is connected to, the USB device may not be
recognized.
When Pro L4160/L4130 is connected to the personal computer to which an external HDD is connected via
USB, the speed of data output to Pro L4160/L4130 may drop.That can cause the head unit to stop temporarily
at the right or left end during printing.
• Your RIP must be compatible with USB
2.0.
• When you connect USB cable, do not
touch the connector contact point with
your bare hand. Static may be generated
and it may break the PCB of this machine.
• Your RIP must be compatible with USB 2.0.
USB cable
USB 2.0 repeater cable