Filter
Top Products
2-27
1
2
Basic Operations
4
5
6
Printing Data
Checking the Status of Ink Cartridges
Check the status of the ink cartridges before you start printing. If the amount of the remaining ink is low, or the
[NEAR END] or [INK END] message is displayed, replace the ink cartridge.
Checking the Status of Waste Ink Bottle
Check the condition of the waste ink bottle before you start printing. If the bottle is nearly full, or a waste ink
bottle confirmation message is displayed, replace the bottle.
• Checking the Ink Cartridges
→ Displaying the Information of this machine ( P.3-21)
• When the ink cartridge is nearly empty
• When [NEAR END] warning is displayed
• When [INK END] warning is displayed
→ Changing an ink cartridge ( P.1-16)
• While [NEAR END] warning is displayed, the current mode returns to LOCAL after each printing has
been completed. You cannot make multiple prints consecutively.
• When [INK END] error occurs while making a print, printing stops and the current mode returns to
LOCAL.
• Printing cannot be started while [INK END] warning is being displayed.
• Checking the Waste Ink Bottle
→ Confirming Machine Information ( P.3-19)
• The waste ink bottle is nearly full
• A waste ink bottle confirmation message is displayed
→ Replace the waste ink bottle with another ( P.4-30)
• When a waste ink bottle confirmation message appears while making a print, printing stops and the
current mode returns to LOCAL.
• Printing cannot be started while a waste ink bottle confirmation message is being displayed.