Filter
Top Products
2-21
1
2
Basic Operations
4
5
6
Test Printing
Test Printing
Print a test pattern to check that there are no discharging defects such as nozzle clogging (slight touching of ink
or nozzle missing).
In addition, you can select the orientation of the test pattern to print from two types in order to perform test
printing repeatedly. Select one depending on your use.
1
Press the key in LOCAL.
• Press to change the test pattern orientation.
2
Press the key.
• Test printing starts.
• When the printing has been completed, the screen returns to step1.
3
Check the printed test pattern.
• When the result is normal, end the operation.
• When the result is abnormal, perform head cleaning.（ P.2-22）
Check before test
printing.
• If a media has been set P.2-5 • If the origin position has been set
• If the head height has been adjusted P.2-5
Media-feeding direction
: When the set value is "FEED DIR."
: When the set value is "SCAN DIR."
TEST PRINT
(SCAN DIR. ) [ENT]
** PRINTING **
PLEASE WA IT
TEST PRINT
(SCAN DIR. ) [ENT]
Abnormal pattern
Nozzles are clogged
Normal pattern
Nozzles are dirty