Filter
Top Products
5-8
7
Press the key.
• Start pushing ink out.
• Flow ink in the jig by 10cm.
• Flow ink from all ports of the damper selected in the Step 3.
8
Terminate air purge by pressing the key.
• Close the port.
9
Press the key.
• The carriage returns to the cap position.
• Filling to the damper starts. Wait for a while until the amount of ink
returns to the normal status.
• When filling has been completed, cleaning is performed.
• When ink filling into the damper has been completed, the screen
returns to the one in the Step 2. For other dampers, perform the
procedures from the Step 3 to 8.
10
Press the key several times to end the setting.
• When removing the jig, ink may leak. Put a
paper towel etc. around the port.
AIR PG
COMPLETED [ ENT ]
Ink
Reference value :
About 10cm
CAPP ING POS I T ION
MOVE START [ ENT ]
PLEASE WA IGT
** CLEANING **
PLEASE WA IGT