2-19
1
2
Basic Operations
4
5
6
Test Feeding
Since heater is used at high temperature, cockles may occur in some of your media. (P.5-10)
Perform this function before printing, and check whether the media can be fed normally.
1
Press the key in LOCAL three
times.
2
Press the key.
3
Press to select ON/OFF.
4
Press the key.
5
Press the key.
• Start test feeding.
6
Press the key.
• The feeding operation is continued until you press the key.
• Feed it to some extent and check the feeding status, and then press the key to terminate.
• When setting "ON", rewind the roll media
to take up the slack before printing.
TEST FEED
[ENT]
BACKWARD FEED
:ON
BACKWARD FEED
:ON
TEST FEED
START [ ENT ]
** TEST FEED **
PLEASE :WA IT