Placing Originals
19
2
Placing Originals
Note
❒ Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.17 “Originals” .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
❒ Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
A Lift the exposure glass cover or
ADF.
Important
❒ Do not lift the exposure glass
cover or ADF forcefully. If you
do, the ADF cover might open
or be damaged.
Note
❒ Be sure to lift the exposure glass
cover or ADF by more than 30°.
Otherwise, the size of the origi-
nal might not be detected cor-
rectly.
B Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1. Positioning mark
2. Left scale
Note
❒ Start with the first page to be
copied.
C Lower the exposure glass cover or
ADF.
Originals ADF Exposure
glass
set11EE
set23EE
AAI025S
KirC3a_oi_AE-F_FM.book Page 19 Friday, March 10, 2006 10:25 AM